GM-1018 Kiln 240V
THIS IS A DROP SHIPPED OR SPECIAL ORDER ITEM. PLEASE CONTACT OR LEAVE A NOTE IN THE COMMENTS BOX REQUESTING ESTIMATED WAIT TIME FOR SHIPPING A 208V version of this model is also available upon request. Sophisticated, Yet Easy to Use • The GlassMaster Controller is the only controller on the market with GlassFire Mode. GlassFire Mode allows you to run a program simply by entering the type of effect you want: Fuse, Tack Fuse or Slump and a speed based on the size and thickness of the project. It really is that easy and it works on most projects. • If you prefer to write your own firing programs simply use the Ramp/Hold programming mode which can store up to 8 of your custom programs with up to 8 Segments. When you are ready to use one of your stored programs just load it and press start. • Built in Diagnostics give you orSkutt's technicians the ability to diagnose kiln problems with just a few button presses. • Skutt is one of the few brands that installs a Current Sensor in every GlassMaster Kiln. This allows you to read the Amperage of each section of the kiln as well as the Voltage and Voltage Under Load. • This model aso can also fit the additional lid lifter option. Zone Control • Thermocouple in each section of the kiln allows controller to control each section separately to even out temperature variations top to bottom. • Critical when fusing on multiple shelves and annealing large blown vessels. • Works in conjunction with balanced elements to ensure firing efficiency. Chamber Capacity • Approximately 24 in. x 24 in. opening and 18 in. high: 4.6 cubic feet. Shipping Dimensions: 37" L x 40" W x 33" H (28.26 CuFt) 207 lbs.