Firekist Infini-V Constriction Tool
Introducing The Infini-V by Firekist; the V that will NOT wear like any traditional fixed V design. These sharpened stainless steel wheels rotate along with your glass during a constriction, which in turn reduces the wear. This means they will stay sharp much longer than fixed V's, they will not become misshapen like traditional V's. The Infini-V is used quite similarly to a traditional V. Hot glass can be rotated down into the space between the wheels, and as it is gently spun in this position, a constriction can be made in the glass. This constriction can then be reworked to keep a constriction in a tube, or the constriction can be used as the point at which a tube or rod can be snapped apart. The only special instruction needed: Press gently during the first rotation while in contact with the wheels, as it is so sharp, plunging into it can get your constriction out of round. The base is Powder coated steel, measuring 3"x 4"x 3/8”. Nice and heavy to keep the Infini-V from moving too easily. Four rubber 5/8" tall feet keep the base off your bench, and also allow for leveling adjustment. The wheels are 2" diameter, and just under 1/16" thick, stainless steel.